WEN 61720 3/4-Inch to 2-Inch 18-Gauge Brad Nailer-Brad Nailers

Product Description

Description Of Product Size:2 inch

Product Description

Remember whenever your kaira nailer was reliable? The WEN 18-Gauge Kaira Nailer effortlessly shoots brads between 3/4 to two inches in dimensions. Having a lightweight 3-pound aluminum body and an appropriate rubber-grip handle, it is the best companion for just about any job site. Just connect your preferred air compressor and start nailing. The WEN Kaira Nailer operates at between 60 to 100 PSI having a 1/4 inch NPT air inlet fitting. The spacious magazine carries as much as 100 brads as the quick-release design makes jam clearing very simple. The package includes oil, adjustment wrenches and a custom transporting situation for convenient storage unemployed. Also it wouldn’t be considered a WEN product whether it weren’t supported by a one year guarantee, an amiable customer help line and a nationwide network of skilled service technicians. The WEN 18-Gauge Kaira Nailer: remember when you can get via a job without your nailer constantly jamming up? Remember WEN.

world wide web.21pw.com

The 18-gauge kaira nailer from WEN fires 18-gauge brads 3/4 to two inches long. It features a variable exhaust deflector, a rubber-wrapped handle, a fast-release for jam-clearing, an aluminum body, and the sunday paper window that shows the rest of the kaira count. Playboy holds 100 brads, and the tool operates at 60-100 psi having a 1/4-inch NPT air inlet fitting. This package includes oil, modifying wrenches, and a custom transporting situation.

See all Product Description

Product Information

Product InformationSize: 2 inch Technical Details
Part Number61720
Item Weight5.2 pounds
Product Dimensions3 x 13 x 11 inches
Item model number61720
Size2 inch
Power Sourceair-powered
Item Package Quantity1
Included Componentscase
Warranty Description12 months Parts and Labor
Additional Information
Customer Reviews 4.7 out of 5 starsSee all reviews 400 reviews 4.7 out of 5 stars
Best Sellers Rank#671 in Home Improvement (See best players)
#1 in Home Improvement > Power & Hand Tools > Power Tools > Nailers & Staplers > Nailers > Brad Nailers
#102 in Home Improvement > Contractor Supply
Shipping Weight5.2 pounds (View shipping rates and guidelines)
Domestic Shipping Item could be shipped within U.s.
International Shipping This item could be transported to select countries outdoors from the U.s. Learn More
Date First AvailableFeb 10, 2006
Warranty & Support
Manufacturer¡¯s warranty could be requested from customer support. Click the link to create a request to customer support. Feedback Would you like to update product info, give feedback on images, or tell us about a lower price?

Customer Reviews

5 star 77%
4 star 16%
3 star 2%
2 star 2%
1 star 3%
See all 400 customer reviews Share your thoughts with other customers Write a customer review

Most Relevant Customer Reviews

200 of 203 people found the following review helpful suprisingly good.
By Greg on May 17, 2010 Size: 2 inch
I'd browse the reviews and so i went ahead and purchased this for around 35.00 Shipped. I acquired it within the mail and opened up up.The situation appeared inexpensive. Now i take out the nailer, It appears like WEN didnt pay much focus on the facts. A few of the paint looked touched up, the trigger only agreed to be a bit of metal and a few of the other bits of the gun looked of questionable quality.This doesnt look even near to the beautiful, Yellow, quality DeWalt that my friend loans me.So nervously i turn it on and include a stack of just one 3/4" nails, they loaded nicely. I test the gun on the 2x4.I tap a few in and their nails go so deep i figured it misfired. And so i turn the small depth wheel underneath the tip,(which feels type of cheap but really works more effectively compared to dewalt) and tap a few more till perfect. I start lounging some base board and the gun includes a very smooth and solid yet lighweight feel into it. Not just one misfire. Even the gun doesnt jump around. and the end appears like it might destroy the board but really did perfectly. I finished your kitchen and hallway and am very impressed using the gun. I have tried personally a DeWalt to baseboard and trim two entire houses, and evaluating the 2 I really think the WEN performs better. I've only shot a few hundred nails from the WEN and so i will need to observe how it stands up. but for 35.00 I possibly could purchase a couple of of those at the expense from the others. It's even beginning to appear more attractive compared to DeWalt.2 Comments Was this review useful for you? Yes No Delivering feedback... Appreciate your feedback.If the review is inappropriate, Please tell us. Sorry, we unsuccessful to record your election. Please try again 147 of 158 people found the following review helpful Better than Harbor Freight
By Charles Seiler on April 26, 2012 size: 2 inch This can be a Pneumatic tool meaning you'll need a minimum of a really small air compressor to operate this. The littlest 120 volt portable air compressors will run these, the majority of the inexpensive small air compressors are under $100. If you do not own an aura compressor, Let me tell you it is a safe investment. They continue for two decades or even more, I purchased one 14 years back, and haven't altered the oil or done anything. If you would like it to last forever, have an "oil" air compressor no "oil free." Shiny things cost about more, but they last forever. For the dimensions, go using the largest one you really can afford, and make certain it's portable, and something you can haul inside your vehicle if you want to go somewhere for any project.
Concerning the 18 gauge kaira nailers:
I got myself a Harbor Freight 18 gauge kaira nailer. I had been happy using the performance, but I observed the rear latch is made of soppy plastic. Should you dropped it once it might shatter the trunk latching mechanism into bits. I came back it and got my $32 back (after tax). I visited virtually all of the websites, Lowe's, Sears, lowes, but had affordable prices on all of the different types of air nailers. I've been a auto technician and carpenter for 16 years. I built my very own air compressor after i would be a kid, and so i possess a good knowledge of air tools, and tools generally. I haven't attempted the WEN yet, when i just purchased it. But here are a few selling points.
1.) The Dewalt has a lot of bad reviews about it jamming
2.) The Harbor Freight nailer spits lots of oil out and Could be untidy, and didn't have power adjustment. It's also made from soft cheap plastic.
3.) The NuMax looks good, and works fine, even though it doesn't have power adjustment, and no quick release to accept front apart to obvious out jams. Read more › 8 Comments Was this review useful for you? Yes No Delivering feedback... Appreciate your feedback.If the review is inappropriate, Please tell us. Sorry, we unsuccessful to record your election. Please try again 82 of 89 people found the following review helpful Some "2 inch" nails are incompatible with this gun
By Mark Colan VINE VOICE on The month of january 3, 2011 Size: 2 inch
This nail gun is a great value, and appears well-crafted. It really works well if you use the proper of nails, which, because the descriptions states, is eighteen gauge, from threeOr4 to two inches.
Regrettably, the factors for nails are so that not every 2 inch nails works with this particular gun, because surprisingly, 2 inch nails are available in two different lengths. I have not found actual 2 inch nails: they are either a bit longer (51mm), like Porter Cable and a number of other brands, or a bit shorter (50mm), for example Bostich. Only the 50 mm nailes (for example Bostich) fit; 51 mm (like Porter Cable) doesn't I've attempted both brands.
This really is unfortunate, since the 51mm type is much more easily available, for instance in your own home Depot. I needed to perform a large amount of searching around to locate 2 inch nails that will use this gun, but I did eventually find a store (a lumber yard) that transported the Bostich brand. It's apparent once the nail will not work: you just cannot load it.
I purchased this gun so that you can shoot 2 inch nails. It will be a quite simple engineering switch to support both 50 and 51 mm nails. Well, I am going for a star off because of not supporting the generally available 51mm size. If only additionally that it might accept 5/8" nails. It really might, but I am not thinking about buying a bundle to discover that they are not effective, or worse, they jam the device.
If you're thinking about this gun and desire to use 2 inch nails, make sure a nearby store carries them before you purchase it.4 Comments Was this review useful for you? Yes No Delivering feedback... Appreciate your feedback.If the review is inappropriate, Please tell us. Sorry, we unsuccessful to record your election. Please try again 29 of 30 people found the following review helpful Inexpensive Price Tag For A Quality Tool
By QuantumJoe83 on June 21, 2009 Size: 2 inch This kaira nailer is effective. The end can mark your surface, so be cautious. No issues with jamming. feels and performs as an costly nailer. Would recommend to anybody who requires a kaira nailer.1 Comment Was this review useful for you? Yes No Delivering feedback... Appreciate your feedback.If the review is inappropriate, Please tell us. Sorry, we unsuccessful to record your election. Please try again 23 of 24 people found the following review helpful Just a little weak with 100 pounds of air pressure.
By All American Mall on December 7, 2012 size: 2 inch
I made use of this to place up crown molding on cabinets. It labored ok but there is several occasions I needed to used hammer and awl to pound nails flush. I'd the nailer switched completely up and pressure was normal. I stored thinking Used to do a problem but it had been switched completely up. It labored ok but I'm a little disappointed because for future use Personally i think limited on what I'm able to apply it. I've got a power staple remover that actually works fine with same compressor and experiences same thickness of wood with depth dial only midway. I did not wish to accomplish staples for molding.
In hindsight I'd have purchased a kaira nailer BEFORE I purchased the staple remover and then purchased a better one than this WEN nailer and so i might have tried on the extender for projects and many future projects.
Should you prefer a nailer for any small project with thin wood like crown molding and don't know for a moment utilize it later or very frequently this WEN is most likely worthwhile because it works "so so" and is affordable. Should you anticipate a lot more uses and have a sizable project like flooring or entire house trim work I recommend a greater quality brand nailer.
just fyi, I looked and found no limitations in air flow, no limitations on adjustment dial, and Used to do use oil that included nailer as instructed.Comment Was this review useful for you? Yes No Delivering feedback... Appreciate your feedback.If the review is inappropriate, Please tell us. Sorry, we unsuccessful to record your election. Please try again See all 400
    Copyright ©2010-2018 www.amcanmomsclub.com